NCP-DB시험대비덤프샘플다운 & NCP-DB적중율높은덤프공부

아직도Nutanix NCP-DB 인증시험을 어떻게 패스할지 고민하시고 계십니까? Itcertkr는 여러분이Nutanix NCP-DB덤프자료로Nutanix NCP-DB 인증시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. Nutanix NCP-DB 시험가이드를 사용해보지 않으실래요? Itcertkr는 여러분께Nutanix NCP-DB시험패스의 편리를 드릴 수 있다고 굳게 믿고 있습니다.

많은 사이트에서도 무료Nutanix NCP-DB덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Nutanix NCP-DB데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리Itcertkr에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다

>> NCP-DB시험대비 덤프샘플 다운 <<

NCP-DB적중율 높은 덤프공부 - NCP-DB최고품질 인증시험공부자료

Itcertkr는 고품질의 IT Nutanix NCP-DB시험공부자료를 제공하는 차별화 된 사이트입니다. Itcertkr는Nutanix NCP-DB응시자들이 처음 시도하는Nutanix NCP-DB시험에서의 합격을 도와드립니다. 가장 적은 시간은 투자하여 어려운Nutanix NCP-DB시험을 통과하여 자격증을 많이 취득하셔서 IT업계에서 자신만의 가치를 찾으세요.

Nutanix NCP-DB 시험요강:

주제	소개
주제 1	Protect NDB-managed Databases Using Time Machine: SLA retention policies, source databases, clones, protection of databases, and Data Access Management (DAM) policies are discussed in this topic.
주제 2	Deploy and Configure an NDB Solution: This topic discusses how to deploy, configure, and NDB Instance.
주제 3	Operate and Maintain an NDB Environment: Application of procedural concepts to register database server, provision databases, and test and publish database patches. Additionally, the topic explains the right method to apply Linux OS patches. Lastly, it delves into databases and troubleshooting of NDB operations.
주제 4	Administer an NDB Environment: While focusing on the administration of an NDB environment, this topic focuses on managing NDB profiles, applying procedural concepts, and managing networks in NDB. Lastly, the topic explains sub-topics of managing access controls in NDB and identifying how to use NDB APIs and CLI.
주제 5	Describe NDB Concepts: It defines database and NDB terminology. The topic also explains benefits and features of NDB.

최신 Nutanix Certified Professional (NCP) NCP-DB 무료샘플문제 (Q207-Q212):

질문 # 207
Where would an administrator find the total space being used by all Era clones for a specific database?

A. On the Era Dashboard Database Summary Table under Clones.
B. Under the Capacity widget on the Database Server VMS > List database summary page.
C. Under the Cloning widget on the Databases > Clones database summary page.
D. On the Database > Overview dashboard.

정답：C

설명：
Nutanix Era leverages the Nutanix time-efficient snapshots to create the clones1. These database clones are highly space-efficient, consuming near-zero bytes by having only the further writes constituting to its size1.
Therefore, an administrator would find the total space being used by all Era clones for a specific database under the Cloning widget on the Databases > Clones database summary page. The other options do not specifically provide information about the total space used by all Era clones for a specific database. Therefore, the correct answer is A. Under the Cloning widget on the Databases > Clones database summary page.

질문 # 208
A clone needs to be created on an existing database server, but there are no Authorized database servers defined to support the cloned database.
In which two ways can Database Server VMs be authorized during a Clone Create operation? (Choose two.)

A. During the database server provisioning process, flag the database server to be authorized for supporting cloned databases.
B. Within Time Machine, use the Actions menu and Authorize Database Server VMs to identify which database server VMs to authorize for clones.
C. Within the Database Server VM Summary window, update the database sever to be authorized for supporting cloned databases.
D. During the Clone creation process, click the plus icon to authorize one or more database server VMs.

정답：B,D

설명：
When creating a clone on an existing database server but no Authorized database servers are defined to support the cloned database, the administrator must authorize the necessary Database Server VMs. Two valid methods exist within NDB: (1) Using the Time Machine interface, the administrator can navigate to the Actions menu and select "Authorize Database Server VMs" to designate specific VMs for clone support, providing a proactive authorization step. (2) During the Clone creation process, the wizard includes an option (e.g., a plus icon) to authorize one or more database server VMs on the fly, streamlining the process if authorization is needed mid-operation.
* Option A (Within Time Machine, use the Actions menu and Authorize Database Server VMs to identify which database server VMs to authorize for clones) is correct as it is a dedicated authorization method in Time Machine.
* Option B (Within the Database Server VM Summary window, update the database server to be authorized for supporting cloned databases) is incorrect because the Summary window is for viewing, not authorizing, clone support.
* Option C (During the Clone creation process, click the plus icon to authorize one or more database server VMs) is correct as it allows real-time authorization during cloning.
* Option D (During the database server provisioning process, flag the database server to be authorized for supporting cloned databases) is incorrect because authorization is not typically set during initial provisioning but rather during clone operations.
These methods ensure the clone can be created on authorized servers.
References
* Nutanix Database Service (NDB) User Guide, Chapter 5: Configuring Time Machines, Section:
Authorizing Database Servers for Clones
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 5: Protect Databases Using Time Machine

질문 # 209
While restoring a PostgreSQL HA instance, an administrator notices that the restore of a standby node has failed. The primary node is ready to seive application traffic.
In what state does NDB leave the database?

A. ONLINE
B. OFFLINE
C. PAKFIAL.READY
D. RECOVERY PENDING

정답：A

설명：
When restoring a PostgreSQL HA instance in NDB, if the standby node fails to restore but the primary node is successfully restored and ready to serve application traffic, NDB considers the database operational from the perspective of the primary node. In this scenario, NDB leaves the database in an "ONLINE" state, reflecting that the primary node is functional and capable of handling requests, even though the HA configuration is not fully intact due to the standby failure. The administrator would need to address the standby node separately (e.g., by re-provisioning or troubleshooting), but the database's state is determined by the primary node's readiness.
* Option A (PAKFIAL.READY) appears to be a typo and is not a valid NDB state.
* Option B (OFFLINE) is incorrect because the primary node is operational, so the database is not offline.
* Option C (ONLINE) is correct as it reflects the primary node's ability to serve traffic.
* Option D (RECOVERY PENDING) is incorrect because the primary node has completed recovery and is active, not pending.
This behavior aligns with NDB's focus on maintaining service availability where possible.
References
* Nutanix Database Service (NDB) User Guide, Chapter 5: Configuring Time Machines, Section:
Restoring HA Instances
* Nutanix Support & Insights, Knowledge Base Article: "Handling Partial Restore Failures in PostgreSQL HA"
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 5: Protect Databases Using Time Machine

질문 # 210
An administrator has been asked to provision a new Oracle single instance database, but cannot proceed with the first step of the wizard. Which statement best describes the current situation?

A. A snapshot must be taken on the original DB.
B. Time Machine is not configured.
C. No remote clusters are configured.
D. Software profile is missing.

정답：D

설명：
When an administrator cannot proceed with the first step of the wizard to provision a new Oracle single instance database in NDB, the most likely reason is that a software profile for Oracle is missing. NDB requires a software profile (which defines the database version, patches, and configuration) to provision a database instance. Without a profile created from a reference VM or uploaded manually, the wizard cannot proceed, as it relies on this profile to configure the instance correctly.
* Option A (Time Machine is not configured) is incorrect because Time Machine is optional for backups and not required for initial provisioning.
* Option B (Software profile is missing) is correct as it is a mandatory prerequisite for provisioning any database instance.
* Option C (No remote clusters are configured) is incorrect because remote clusters are relevant for multi-cluster setups, not single instance provisioning.
* Option D (A snapshot must be taken on the original DB) is incorrect because snapshots are for protection, not a prerequisite for provisioning.
The administrator must create or import a software profile to resolve this issue.
References
* Nutanix Database Service (NDB) User Guide, Chapter 4: Managing Software Profiles, Section:
Provisioning Databases
* Nutanix Support & Insights, Knowledge Base Article: "Troubleshooting Provisioning Failures in NDB"
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Blueprint, Section 4: Manage Database Software Profiles

질문 # 211
In order to configure and begin taking advantage of the Data Access Management feature of Time Machine, which action should an administrator take first?

A. Enable NDB multi-cluster and register required Nutanix cluster(s).
B. Take an application consistent snapshot of the source database.
C. Enable NDB HA to protect the metadata associated with the configuration.
D. Ensure that the source database has been provisioned on the remote Nutanix cluster.

정답：A

설명：
To configure and begin taking advantage of the Data Access Management feature of Time Machine, the administrator must first enable NDB multi-cluster and register the required Nutanix cluster(s). Data Access Management allows controlled access to data (e.g., snapshots, clones) across multiple clusters, requiring a multi-cluster setup. This involves enabling multi-cluster support in NDB and registering remote clusters to facilitate data replication and access policies.
Other actions are prerequisites or subsequent steps:
* A. Enable NDB HA to protect the metadata associated with the configuration: HA is beneficial but not the first step for Data Access Management.
* C. Take an application consistent snapshot of the source database: This is a later step after multi- cluster setup.
* D. Ensure that the source database has been provisioned on the remote Nutanix cluster:
Provisioning follows multi-cluster registration.
Thus, the verified answer is B, establishing the multi-cluster foundation.
Official Nutanix Database Automation References
* Nutanix Database Management & Automation (NDMA) course, Module 5: Data Protection and Recovery, Lesson 5.3: Configuring Data Access Management.
* Nutanix Certified Professional - Database Automation (NCP-DB) v6.5 Knowledge Objectives, Section
5: Protect Databases Using NDB, Objective 5.3: Configure Data Access (applicable to v6.10).
* Nutanix NDB Administration Guide: "Data Access Management Setup" section.

질문 # 212
......

Itcertkr의Nutanix NCP-DB 인증시험덤프는 자주 업데이트 되고, 오래 되고 더 이상 사용 하지 않는 문제들은 바로 삭제해버리며 새로운 최신 문제들을 추가 합니다. 이는 응시자가 확실하고도 빠르게Nutanix NCP-DB덤프를 마스터하고Nutanix NCP-DB시험을 패스할수 있도록 하는 또 하나의 보장입니다. 매력만점Nutanix NCP-DB덤프 강력 추천합니다.

NCP-DB적중율 높은 덤프공부: https://www.itcertkr.com/NCP-DB_exam.html